Motor ny Chevrolet Performance 350/5,7 V8 1987 til 1995 (GM 12691671 - 12681430)
PT. Kender vi desværre ikke en leveringstid på den og muligvis kommer den ikke i produktion igen fra GM. !
Passer på følgende biler :
Chevrolet 1987 til 1995
Engine specs :
* 1986 and up 2-bolt main one-piece crankshaft seal block (no mechanical fuel pump)
* Horsepower: 210 hp at 4,000 rpm
* Torque: 300 lbs.-ft. at 2,800 rpm
* 9.25:1 compression ratio
* High-volume oil pump
Camshaft specs :
* Flat tappet hydraulic camshaft
* Intake lift .382 in.
* Exhaust lift .402 in.
* Intake duration at .050: 165.9
* Exhaust duration at .050: 174.8
* Lobe center separation: 111.9
Cylinder head specs :
* Casting number 14102193
* 64cc combustion chamber
* 1.94 in. intake valve, 1.50 in. exhaust valve
* Valve spring part number is 3911068 (same spring used with the old 300 hp 350 crate engine)
* Installed height 1.70 in. pressure at installed height is 80 lbs.; pressure with valve open is 267 lbs.
* These springs are good for .550 in. lift, but clearance between guide and retainer must be double-checked before attempting
* Centerbolt valve cover flange
* 1987-95 intake manifold bolt pattern with center intake bolts canted at 72 angle
* This is not a performance-oriented cylinder head. It is classified as a high swirl head intended for good bottom-end torque and fuel economy.
Engine also includes :
* 4 qt. oil pan (5w/filter)
* Timing cover
* 8 in. balancer
* Valve covers
Prisen er beregnet ud fra, at de kommer hjem med skib. Skal de flyves hjem, vil der være et tillæg til prisen.
Hvis du er i tvivl om hvilken hvilken motor du skal bruge til din bil, så endelig kontakt os via mail eller på telefon.